Current gps jammer technology park , gps jammer military base

Current gps jammer technology park , gps jammer military base

  • Post Author:ZG6Q_8SikL@aol.com

QuickBird satellite image of Kalutara Beach on the southwestern coast of Sri Lanka showing the receding waters and beach damage from the Sumatra tsunami.( Credit: Digital Globe) How Ionospheric Observations Might Improve the Global Warning System By Giovanni Occhipinti, Attila Komjathy, and Philippe Lognonné Recent investigations have demonstrated that GPS might be an effective tool for improving the tsumani early-warning system through rapid determination of earthquake magnitude using data from GPS networks. A less obvious approach is to use the GPS data to look for the tsunami signature in the ionosphere. INNOVATION INSIGHTS by Richard Langley THE TSUNAMI generated by the December 26, 2004, earthquake just off the coast of the Indonesian island of Sumatra killed over 200,000 people. It was one of the worst natural disasters in recorded history. But it might have been largely averted if an adequate warning system had been in place. A tsunami is generated when a large oceanic earthquake causes a rapid displacement of the ocean floor. The resulting ocean oscillations or waves, while only on the order of a few centimeters to tens of centimeters in the open ocean, can grow to be many meters even tens of meters when they reach shallow coastal areas. The speed of propagation of tsunami waves is slow enough, at about 600 to 700 kilometers per hour, that if they can be detected in the open ocean, there would be enough time to warn coastal communities of the approaching waves, giving people time to flee to higher ground. Seismic instruments and models are used to predict a possible tsunami following an earthquake and ocean buoys and pressure sensors on the ocean bottom are used to detect the passage of tsunami waves. But globally, the density of such instrumentation is quite low and, coupled with the time lag needed to process the data to confirm a tsunami, an effective global tsunami warning system is not yet in place. However, recent investigations have demonstrated that GPS might be a very effective tool for improving the warning system. This can be done, for example, through rapid determination of earthquake magnitude using data from existing GPS networks. And, incredible as it might seem, another approach is to use the GPS data to look for the tsunami signature in the ionosphere: the small displacement of the ocean surface displaces the atmosphere and makes it all the way to the ionosphere, causing measurable changes in ionospheric electron density. In this month’s column, we look in detail at how a tsunami can affect the ionosphere and how GPS measurements of the effect might be used to improve the global tsunami warning system. “Innovation” is a regular column that features discussions about recent advances in GPS technology and its applications as well as the fundamentals of GPS positioning. The column is coordinated by Richard Langley of the Department of Geodesy and Geomatics Engineering at the University of New Brunswick. The December 26, 2004, earthquake-generated Sumatra tsunami caused enormous losses in life and property, even in locations relatively far away from the epicentral area. The losses would likely have never been so massive had an effective worldwide tsunami warning system been in place. A tsunami travels relatively slowly and it takes several hours for one to cross the Indian Ocean, for example. So a warning system should be able to detect a tsunami and provide an alert to coastal areas in its path. Among the strengths of a tsunami early-warning system would be its capability to provide an estimate of the magnitude and location of an earthquake. It should also confirm the amplitude of any associated tsunami, due to massive displacement of the ocean bottom, before it reaches populated areas. In the aftermath of the Sumatra tsunami, an important effort is underway to interconnect seismic networks and to provide early alarms quantifying the level of tsunami risk within 15 minutes of an earthquake. However, the seismic estimation process cannot quantify the exact amplitude of a tsunami, and so the second step, that of tsunami confirmation, is still a challenge. The earthquake fault mechanism at the epicenter cannot fully explain the initiation of a tsunami as it is only approximated by the estimated seismic source. The fault slip is not transmitted linearly at the ocean bottom due to various factors including the effect of the bathymetry, the fault depth, and the local lithospheric properties as well as possible submarine landslides associated with the earthquake. In the open ocean, detecting, characterizing, and imaging tsunami waves is still a challenge. The offshore vertical tsunami displacement (on the order of a few centimeters up to half a meter in the case of the Sumatra tsunami) is hidden in the natural ocean wave fluctuations, which can be several meters or more. In addition, the number of offshore instruments capable of tsunami measurements, such as tide gauges and buoys, is very limited. For example, there are only about 70 buoys in the whole world. As a tsunami propagates with a typical speed of 600–700 kilometers per hour, a 15-minute confirmation system would require a worldwide buoy network with a 150-kilometer spacing. Satellite altimetry has recently proved capable of measuring the sea surface variation in the case of large tsunamis, including the December 2004 Sumatra event. However, satellites only supply a few snapshots along the sub-satellite tracks. Optical imaging of the shore hs successfully measured the wave arrival at the coastline (see ABOVE PHOTO), but it is ineffective in the open sea. At present, only ocean-bottom sensors and GPS buoy receivers supply measures of mid-ocean vertical displacement. In many cases, the tsunami can only be identified several hours after the seismic event due to the poor distribution of sensors. This delay is necessary for the tsunami to reach the buoys and for the signal to be recorded for a minimum of one wave period (a typical tsunami wave period is between 10 and 40 minutes) to be adequately filtered by removing the “noise” due to normal wave action. In the case of the December 2004 Sumatra event, the first tsunami measurements by any instrumentation were only made available about 3 hours after the earthquake. They were supplied by the real-time tide gauge at the Cocos Islands, an Australian territory in the southeast Indian Ocean (see FIGURE 1 where the tsunami signature is superimposed on the large semidiurnal tide fluctuation). Up until that time, the tsunami could not be fully confirmed and coastal areas remained vulnerable to tsunami damage. This delay in confirmation is a fundamental weakness of the existing tsunami warning systems. Figure 1. The Sumatra tsunami signal measured at the Cocos Islands by the tide gauge (red) and by the co-located GPS receiver (blue). The tide gauge measures the sea-level displacement (tide plus superimposed tsunami) and the GPS receiver measures the slant total electron content perturbation (+/-1 TEC unit) in the ionosphere. Ionospheric Perturbation. Recently, observational and modeling results have confirmed the existence and detectability of a tsunamigenic signature in the ionosphere. Physically, the displacement induced by tsunamis at the sea surface is transmitted into the atmosphere where it produces internal gravity waves (IGWs) propagating upward. (When a fluid or gas parcel is displaced at an interface, or internally, to a region with a different density, gravity restores the parcel toward equilibrium resulting in an oscillation about the equilibrium state; hence the term gravity wave.) The normal ocean surface variability has a typical high frequency (compared to tsunami waves) and does not transfer detectable energy into the atmosphere. In other words, the Earth’s atmosphere behaves as an “analog low-pass filter.” Only a tsunami produces propagating waves in the atmosphere. During the upward propagation, these waves are strongly amplified by the double effects of the conservation of kinetic energy and the decrease of atmospheric density resulting in a local displacement of several tens of meters per second at 300 kilometers altitude in the atmosphere. This displacement can reach a few hundred meters per second for the largest events. At an altitude of about 300 kilometers, the neutral atmosphere is strongly coupled with the ionospheric plasma producing perturbations in the electron density. These perturbations are visible in GPS and satellite altimeter data since those signals have to transit the ionosphere. The dual-frequency signal emitted by GPS satellites can be processed to obtain the integral of electron density along the paths between the satellites and the receiver, the total electron content (TEC). Within about 15 minutes, the waves generated at the sea surface reach ionospheric altitudes, creating measurable fluctuations in the ionospheric plasma and consequently in the TEC. This indirect method of tsunami detection should be helpful in ocean monitoring, allowing us to follow an oceanic wave from its generation to its propagation in the open ocean. So, can ionospheric sounding provide a robust method of tsunami confirmation? It is our hope that in the future this technique can be incorporated into a tsunami early-warning system and complement the more traditional methods of detection including tide gauges and ocean buoys. Our research focuses on whether ground-based GPS TEC measurements combined with a numerical model of the tsunami-ionosphere coupling could be used to detect tsunamis robustly. Such a detection scheme depends on how the ionospheric signature is related to the amplitude of the sea surface displacement resulting from a tsunami. In the near future, the ionospheric monitoring of TEC perturbations might become an integral part of a tsunami warning system that could potentially make it much more effective due to the significantly increased area of coverage and timeliness of confirmation. In this article, we’ll take a look at the current state of the art in modeling tsunami-generated ionospheric perturbations and the status of attempts to monitor those perturbations using GPS. Some Background Pioneering work by the Canadian atmospheric physicist Colin Hines in the 1970s suggested that tsunami-related IGWs in the atmosphere over the oceanic regions, while interacting with the ionospheric plasma, might produce signatures detectable by radio sounding. In June 2001, an episodic perturbation was observed following a tsunamigenic earthquake in Peru. After its propagation across the Pacific Ocean (taking about 22 hours), the tsunami reached the Japanese coast and its signature in the ionosphere was detected by the Japanese GPS dense network (GEONET). The perturbation, shown in FIGURE 2, has an arrival time and characteristic period consistent with the tsunami propagation determined from independent methods. Unfortunately, similar signatures in the ionosphere are also produced by IGWs associated with traveling ionospheric disturbances (TIDs), and are commonly observed in the TEC data. However, the known azimuth, arrival time, and structure of the tsunami allows us to use this data source, even if it contains background TIDs. Figure 2. The observed signal for the June 23, 2001, tsunami (initiated offshore Peru). Total electron content variations are plotted at the ionosphere pierce points. A wave-like disturbance is seen propagating toward the coast of Honshu, the main island of Japan. The December 26, 2004, Sumatra earthquake, with a magnitude of 9.3, was an order of magnitude larger than the Peru event and was the first earthquake and tsunami of magnitude larger than 9 of the so-called “human digital era,” comparable to the magnitude 9.5 Chilean earthquake of May 22, 1960. In addition to seismic waves registered by global seismic networks, the Sumatra event produced infragravity waves (long-period wave motions with typical periods of 50 to 200 seconds) remotely observed from the island of Diego Garcia, perturbations in the magnetic field observed by the CHAMP satellite, and a series of ionospheric anomalies. Two types of ionospheric anomaly were observed: anomalies of the first type, detected worldwide in the first few hours after the earthquake, were reported from north of Sumatra, in Europe, and in Japan. They are associated with the surface seismic waves that propagate around the world after an earthquake rupture (so-called Rayleigh waves). Anomalies of the second type were detected above the ocean and were clearly associated with the tsunami. In the Indian Ocean, the occurrence times of TEC perturbations observed using ground-based GPS receivers and satellite altimeters were consistent with the observed tsunami propagation speed. The GPS observations from sites to the north of Sumatra show internal gravity waves most likely coupled with the tsunami or generated at the source and propagating independently in the atmosphere. The link with the tsunami is more evident in the observations elsewhere in the Indian Ocean. The TEC perturbations observed by the other ground-based GPS receivers moved horizontally with a velocity coherent with the tsunami propagation. Figure 3. The tsunamigenic earthquake mechanism and transfer of energy in the neutral and ionized atmosphere. The solid Earth displacement produces the tsunami and the sea surface displacement produces an internal gravity wave in the neutral atmosphere, which perturbs the electron distribution in the ionosphere. The amplitude of the observed TEC perturbations is strongly dependent on the filter method used. The four TECU-level peak-to-peak variations in filtered GPS TEC measurements from north of Sumatra are coherent with the differential TEC at the 0.4 TECU per 30 seconds level observed in the rest of the Indian Ocean. (One TEC unit or TECU is 1016 electrons per meter-squared, equivalent to 0.162 meters of range delay at the GPS L1 frequency.) Such magnitudes can be detected using GPS measurements since GPS phase observables are sensitive to TEC fluctuations at the 0.01 TECU level. We emphasize also the role of the elevation angle in the detection of tsunamigenic perturbations in the ionosphere. As a consequence of the integrated nature of TEC and the vertical structure of the tsunamigenic perturbation, low-elevation angle geometry is more sensitive to the tsunami signature in the GPS data, hence it is more visible. The TEC perturbation observed at the Cocos Islands by GPS can be compared with the co-located tide-gauge (Figure 1). The tsunami signature in the data from the two different instruments shows a similar waveform, confirming the sensitivity of the ionospheric measurement to the tsunami structure. The link between the tsunami at sea level and the perturbation observed in the ionosphere has been demonstrated using a 3D numerical modeling based on the coupling between the ocean surface, the neutral atmosphere, and the ionosphere (see FIGURE 3). The modeling reproduced the TEC data with good agreement in amplitude as well as in the waveform shape, and quantified it by a cross-correlation (see FIGURE 4). The resulting shift of +/-1 degree showed the presence of zonal and meridional winds neglected in the modeling. The presence of the wind can, indeed, introduce a shift of 1 degree in latitude and 1.5 degrees in longitude. Since modeling is an effective method to discriminate between the tsunami signature in the ionosphere and other potential perturbations, the GPS observations can be a useful tool to develop an inexpensive tsunami detection system based on the ionospheric sounding. Figure 4. Satellite altimeter and total electron content (TEC) signatures of the Sumatra tsunami. The modeled and observed TEC is shown for (a) Jason-1 and for (b) Topex/Poseidon: data (black), synthetic TEC without production-recombination-diffusion effects (blue), with production-recombination (red), and production-recombination-diffusion (green). The Topex/Poseidon synthetic TEC has been shifted up by 2 TEC units. In (c) and (d), the altimetric measurements of the ocean surface (black) are plotted for the Jason-1 and Topex/Poseidon satellites, respectively. The synthetic ocean displacement, used as the source of internal gravity waves in the neutral atmosphere, is shown in red. In (e), the cross-correlations between TEC synthetics and data are shown for Jason-1 (blue) and Topex/Poseidon (red). Modeling TEC Perturbations A model to describe the effect of a tsunami on the ionosphere has been developed at the Institut de Physique du Globe de Paris (IPGP), France. It is comprised of three main parts. Firstly, it computes tsunami propagation using realistic bathymetry of, for example, the Indian Ocean. Secondly, an oceanic displacement is used to excite IGWs in the neutral atmosphere. Thirdly, it computes the response of the ionosphere induced by the neutral atmospheric motion resulting in enhanced electron densities. After integrating the electron densities, we obtain modeled (synthetic) TEC data. The modeling steps are as follows: Tsunami Propagation. Tsunami modeling is an established science and the propagation of tsunamis is generally based on a shallow-water hypothesis. Under this hypothesis, the ocean is considered as a simple layer where the ocean depth, h, is locally taken into account in the tsunami propagation velocity, v = √ hg, which directly depends on h and the gravity acceleration g. The modeling, usually based on finite differences, solves the appropriate hydrodynamic equations. Neutral Atmosphere Coupling. A tsunami is an oceanic gravity wave and its propagation is not limited to the oceanic surface; as previously discussed, the ocean displacement is transferred to the atmosphere where it becomes an internal gravity wave. This coupling phenomenon is linear and can be reproduced solving the wave propagation equations, nominally the continuity and the so-called Navier-Stokes equations. These equations are solved assuming the atmosphere to be irrotational, inviscid, and incompressible. The IGWs are, indeed, imposed by displacement of the mass under the effect of the gravity force, contrary to the elastic waves generated by compression (for example, sound waves), so the medium can be considered incompressible. FIGURE 5 shows the IGWs produced by the Sumatra tsunami. The inversion of the velocity with altitude (wind shear) is a typical structure of IGWs. Neutral-Plasma Coupling. The tsunamigenic IGWs are injected into a 3D ionospheric model to reproduce the induced electron density perturbations. In essence, the coupling model solves the hydromagnetic equations for three ion species (O2 + , NO+ , and O+ ). Physically, the neutral atmosphere motion induces fluctuations in the plasma velocity by way of momentum transfer driven by collision frequency and the Lorentz term associated with Earth’s magnetic and electric fields. Ion loss, recombination, and diffusion are also taken into account in the ion continuity equation. Finally, the perturbed electron density is inferred from ion densities using the charge neutrality hypothesis. The International Reference Ionosphere model is used for background electron density; SAMI2 (a recursive acronym: SAMI2 is Another Model of the Ionosphere) is used for collision, production, and loss parameters; and a constant geomagnetic field is assumed based on the International Geomagnetic Reference Field. FIGURE 5 shows the perturbation induced in the ionospheric plasma by the tsunamigenic IGW following the Sumatra event. The perturbation is strongly localized to around 300 kilometers altitude where the electron density background is maximized. Figure 5. Internal gravity waves (IGWs) generated by the Sumatra tsunami and the response of the ionosphere to neutral motion at 02:40 UT (almost two hours after the earthquake). On the left, the normalized vertical velocity induced by tsunami-generated IGWs in the neutral atmosphere is shown. On the right, the perturbation induced by IGWs in the ionospheric plasma (in electrons per cubic meter) is shown, with the maximum perturbation at an altitude of about 300 kilometers. The vertical cut shown in these profiles is at a latitude of -1 degree. The resulting electron density dynamic model described above allows us to compute a map of the perturbed TEC by simple vertical integration (see FIGURE 6). In addition to the geometrical dispersion of the tsunami, the TEC map shows horizontal heterogeneities in the electron density perturbation that are induced by the geomagnetic field inclination. The magnetic field plays a fundamental role in the neutral-plasma coupling, resulting in a strong amplification at the magnetic equator where the magnetic field is directed horizontally. The isolated perturbation appearing more to the south is probably induced by the full development of the IGW in the atmosphere. Recent work also explains this second perturbation as induced by the role of the magnetic field in the neutral-plasma coupling. Figure 6. The signature of the Sumatra tsunami in total electron content (TEC) at 03:18 UT (right) compared with the unperturbed TEC (left). The TEC images have been computed by vertical integration of the perturbed and unperturbed electron density fields. The broken lines represent the Topex/Poseidon (left) and Jason-1 (right) trajectories. The blue contours represent the geomagnetic field inclination. GPS Data Processing To validate our model, we use ground-based GPS receivers to look for the ionospheric signal induced by tsunamis. Prior research has shown post-processed results detecting a tsunami-generated TEC signal using regional GPS networks such as GEONET in Japan (about 1,000 stations) or the Southern California Integrated GPS Network (about 200 stations). Those studies benefited from the very high density of GPS receivers in the regional networks, so that, for example, no forward modeling was needed to help initially identify the characteristics of the tsunami-generated signal. High-Precision Processing. More than 1,300 globally-distributed dual-frequency GPS receivers are available using publicly accessible networks, including those of the International GNSS Service and the Continuously Operating GPS Stations coordinated by the U.S. National Geodetic Survey. Most researchers estimate vertical ionospheric structure and, simultaneously, treat hardware-related biases as nuisance parameters. In our approach for calibrating GPS receiver and satellite inter-frequency biases, we take advantage of all available GPS receivers using a new processing technique based on the Global Ionospheric Mapping software developed at the Jet Propulsion Laboratory (JPL). FIGURE 7 shows a JPL TEC map using 1,000 GPS stations. This new capability is designed to estimate receiver biases for all stations in the global network. We solve for the instrumental biases by modeling the ionospheric delay and removing it from the observation. Figure 7. The total electron content (TEC) between 01:00 and 01:15 UT on December 26, 2004, at ionosphere pierce points (IPPs) provided by a global network of more than 1,000 GPS tracking stations. To highlight variations, a five-day average of TEC has been subtracted from the observed TEC. Ionospheric Warning System The currently implemented tsunami warning system uses seismometers to detect earthquakes and to perform an estimation of the seismic moment by monitoring seismic waves. After a potential tsunami risk is determined, ocean buoy and pressure sensors have to confirm the tsunami risk. Unfortunately, the number of available ocean buoys is limited to about 70 over the whole planet. With the existing system, it may take several hours to confirm a tsunami when taking into account both the propagation time (of tsunamis reaching buoys) and data-processing time. On the other hand, the proposed ionosphere-based tsunami detection system may only require the propagation time and data-processing delays of only up to about 15–30 minutes. GPS receivers are able to sound the ionosphere up to about 20 degrees away from the receiver location, and a dense GPS network can therefore increase the coverage of the monitored area. The fundamental idea behind a detection method is that we need to separate tsunami-generated TEC signatures from other sources of ionospheric disturbances. However, the tsunami-generated TEC perturbations are distinguishable because they are tied to the propagation characteristics of the tsunami. Tsunami-related fluctuations should be in the gravity-wave period domain and cohere in geometry and distance with the earthquake epicenter (for example, they show up in data on multiple satellites from multiple stations and, with increasing distance from the epicenter, at a rate related to tsunami propagation speed). The coupled tsunami model described earlier can also be used to compute a prediction for the tsunami-generated TEC perturbation based on the seismic displacement as an input parameter to the model. The model prediction may be used as a detection aid by indicating the location of the tsunami wave front with time. This permits us to focus our detection efforts on specific locations and times, and will allow us to discriminate signal from noise. The model also provides information on the expected magnitude of the TEC perturbation. This provides further value in filter discrimination. Cross-correlations can be performed on nearby observations using different satellites and stations to take advantage of tsunami-related perturbations being coherent in geometry and distance from the epicenter. Once the signal is detected in data from multiple satellites and stations, we can “track” and image the tsunami during its propagation in space and time. The goal of our research is to assess the feasibility of detecting tsunamis in near real time. This requires that GPS data be acquired rapidly. Rapid availability of ground-based GPS data has been demonstrated via the NASA Global Differential GPS System, a highly accurate, robust real-time GPS monitoring and augmentation system. Conclusions Earlier research using GPS-derived TEC observations has revealed TEC perturbations induced by tsunamis. However, in our research, we use a combination of a coupled ionosphere-atmosphere-tsunami model with large GPS data sets. Ground-based GPS data are used to distinguish tsunami-generated TEC perturbations from background fluctuations. Tsunamis are among the most disrupting forces humankind faces. The December 26, 2004, earthquake and resulting tsunami claimed more than 200,000 lives, with several hundreds of thousands of people injured. The damage in infrastructure and other economic losses were estimated to be in the range of tens of billions of dollars. To help prevent such a global disaster from occurring again, we suggest that ionospheric sounding by GPS be integrated into the existing tsunami warning system as soon as possible. Acknowledgments This article is based on the paper “Three-Dimensional Waveform Modeling of Ionospheric Signature Induced by the 2004 Sumatra Tsunami” published in Geophysical Research Letters. The authors wish to acknowledge François Crespon (Noveltis, Ramonville-Saint-Agne, France) for the TEC data analysis in Figure 1, Juliette Artru (Centre National d’Etudes spatiales – CNES, Toulouse, France) for her work on the detection of tsunamigenic TEC perturbations shown in this article, and Grégoire Talon for Figure 3. The IPGP portion of the work is sponsored by L’Agence Nationale de la Recherche, by CNES, and by the Ministère de l’Enseignement supérieur et de la Recherche. The first author would also like to thank John LaBrecque of NASA’s Science Mission Directorate for supporting his fellowship at the California Institute of Technology/JPL. GIOVANNI OCCHIPINTI received his Ph.D. at the Institut de Physique du Globe de Paris (IPGP) in 2006. In 2007, he joined NASA’s Jet Propulsion Laboratory (JPL), California Institute of Technology, as a postdoctoral fellow to continue his work on the detection and modeling of tsunamigenic perturbations in the ionosphere. He will soon take up the position of assistant professor at the University of Paris and IPGP. His scientific interests are focused on solid Earth-atmosphere-ionosphere coupling. ATTILA KOMJATHY is senior staff member of the Ionospheric and Atmospheric Remote Sensing Group of Tracking Systems and Applications Section at JPL, specializing in remote sensing techniques. He received his Ph.D. from the Department of Geodesy and Geomatics Engineering at the University of New Bruns-wick, Canada, in 1997. He has received the Canadian Governor General’s Gold Medal for Academic Excellence and NASA awards including an Exceptional Space Act Award. PHILIPPE LOGNONNÉ is the director of the Space Department of IPGP, a professor at the University of Paris VII, and a junior member of the Institut Universitaire de France. His science interests are in the field of remote sensing and are related to the detection of seismic waves and tsunamis in the ionosphere. Also, he participates in several projects in planetary seismology. FURTHER READING Ionospheric Seismology “3D Waveform Modeling of Ionospheric Signature Induced by the 2004 Sumatra Tsunami” by G. Occhipinti, P. Lognonné, E. Alam Kherani, and H. Hebert, in Geophysical Research Letters, Vol. 33, L20104, doi:10.1029/2006GL026865, 2006. “Ground-based GPS Imaging of Ionospheric Post-seismic Signal” by P. Lognonné, J. Artru, R. Garcia, F. Crespon, V. Ducic, E. Jeansou, G. Occhipinti, J. Helbert, G. Moreaux, and P.E. Godet in Planetary and Space Science, Vol. 54, No. 5, April 2006, pp. 528–540. “Tsunamis Detection in the Ionosphere” by J. Artru, P. Lognonné, G. Occhipinti, F. Crespon, R. Garcia, E. Jeansou, and M. Murakami in Space Research Today, Vol. 163, 2005, pp. 23–27. “On the Possible Detection of Tsunamis by a Monitoring of the Ionosphere” by W.R. Peltier and C.O. Hines in Journal of Geophysical Research, Vol. 81, No. 12, 1976, pp. 1995–2000. Space and Planetary Geophysics Laboratory at the IPGP. Ionospheric Effects on GPS “Unusual Topside Ionospheric Density Response to the November 2003 Superstorm” by E. Yizengaw, M.B. Moldwin, A. Komjathy, and A.J. Mannucci in Journal of Geophysical Research, Vol. 111, A02308, doi:10.1029/2005JA011433, 2006. “Automated Daily Processing of More than 1000 Ground-based GPS Receivers for Studying Intense Ionospheric Storms” by A. Komjathy, L. Sparks, B.D. Wilson, and A.J. Mannucci in Radio Science, Vol. 40, RS6006, doi:10.1029/2005RS003279, 2005. “Space Weather: Monitoring the Ionosphere with GPS” by A. Coster, J. Foster, and P. Erickson in GPS World, Vol. 14, No. 5, May 2003, pp. 42–49. “GPS, the Ionosphere, and the Solar Maximum” by R.B. Langley in GPS World, Vol. 11, No. 7, July 2000, pp. 44–49. Real-time GPS Data Collection and Dissemination NASA Global Differential GPS System

current gps jammer technology park

Hoover series 300 ac adapter 4.5vac 300ma used 2x5.5x11mm round,none reports/minutes 7 - 15 1.lexmark click cps020300050 ac adapter 30v 0.50a used class 2 tra.motorola 35048035-a1 ac adapter 4.8vdc 350ma spn4681c used cell,acbel api3ad01 ac adapter 19vdc 6.3a 3x6.5mm -(+) used power sup,panasonic re7-25 ac adapter 5vdc 1000ma used 2 hole pin,here is the diy project showing speed control of the dc motor system using pwm through a pc.butterfly labs ac adapter 13vdc 31a 2x 6pin pci-e bfl power supp,tec b-211-chg-qq ac adapter 8.4vdc 1.8a battery charger,it's compatible with all major carriers to boost 4g lte and 3g signals,toshiba sadp-75pb b ac adapter 15vdc 5a used 3x6.5mm pa3469e-1ac.wireless mobile battery charger circuit,mobile phone jammer market size 2021 by growth potential,sony ericsson 316ams43001 ac adapter 5v dc 400ma -(+)- 0.5x2.5mm.15 to 30 metersjamming control (detection first).ac/dc adapter 5v 1a dc 5-4.28a used 1.7 x 4 x 12.6 mm 90 degree,delta adp-10sb rev.h ac adapter 5vdc 2a 2x5.5mm hp compaq hewlet.hp ppp012l-s ac adapter 19vdc 4.74a used -(+) 1.5x4.7mm round ba,condor sa-072a0u-2 used 7.5vdc 2a adapter 2.5 x 5.5 x 11.2mm,delta electronics adp-35eb ac adapter 19vdc 1.84a power supply,bellsouth dv-1250ac ac adapter 12vac 500ma 23w power supply,the cockcroft walton multiplier can provide high dc voltage from low input dc voltage,suppliers and exporters in agra.once i turned on the circuit.signal jammers are practically used to disable a mobile phone’s wi-fi,creative a9700 ac adapter9vdc 700ma used -(+)- 2x5.5mm 120vac,cnet ad1605c ac adapter dc 5vdc 2.6a -(+)- 1x3.4mm 100-240vac us,goldfear ac adapter 6v 500ma cellphone power supply,a51813d ac adapter 18vdc 1300ma -(+)- 2.5x5.5mm 45w power supply,replacement ppp009l ac adapter 18.5vdc 3.5a 1.7x4.8mm -(+) power.


gps jammer military base 1634
gps jamming technology officer 2907
gps jammers illegal eviction 3251
gps jammer china gourmet 7892
gps jammer circuit pdf 1555
gps jammer Sainte-Anne-de-Beaupré 6692
gps jammer military aircraft 5519
gps jammer cheap north 7570
gps volgsysteem jammer fidget 7804
gps vehicle jammer truck 619
onstar gps jammer currently 2037
gps repeater jammer download 6948
optima gps jammer technology 1681
gps jammer Saint-Jérôme 4468
onstar gps jammer china 822
radar jammer coating technology 5212
comet-1 gps jammer currently 6445
gps jammer china buffet 4816
van gps jammer model 3736
cell phone & gps jammer technology 1156
jammer technology roadmap pdf 3212
taxi drivers using gps jammer cheap 4042
jammer gps euro disney 3566
gps jammer Flin Flon 7340
gsm gps jammer technology 5443
mobile jammer Otterburn Park 8382
obd2 gps jammer schematic 7425
verizon gps jammer currently 3503
s-gps jammer 12v tire 8302

Oem ad-0680 ac adapter 6vdc 800ma used -(+) 1.1x3.5x11mm round b.the data acquired is displayed on the pc,elementech au1361202 ac adapter 12vdc 3a -(+) used2.4 x 5.5 x.hoyoa bhy481351000u ac adapter 13.5vdc 1000ma used -(+) 2.5x5.5x,campower cp2200 ac adapter 12v ac 750ma power supply,d-link ams6-1201000su ac adapter 12vdc 1a used -(+) 1.5x3.6mm st,pki 6200 looks through the mobile phone signals and automatically activates the jamming device to break the communication when needed,black & decker vpx0320 used 7.4vdc 230ma dual port battery charg.ite 3a-041wu05 ac adapter 5vdc 1a 100-240v 50-60hz 5w charger p.hewlett packard hstnn-aa04 10-32v dc 11a 90w -(+)- 1x5mm used,6 different bands (with 2 additinal bands in option)modular protection.replacement 324816-001 ac adapter 18.5v 4.9a used,the mobile jammer device broadcasts the signal of the same frequency to the gsm modem,mobile jammerseminarsubmitted in partial fulfillment of the requirementsfor the degree ofbachelor of technology in information …,you’ll need a lm1458 op amp and a lm386 low.tectrol kodak nu60-9240250-13 ac adapter 24v 2.5a ite power supp,ault 336-4016-to1n ac adapter 16v 40va used 6pin female medical,balance electronics gpsa-0500200 ac adapter 5vdc 2.5a used,ibm 92p1016 ac adapter 16v dc 4.5a power supply for thinkpad.fujitsu sec80n2-19.0 ac adapter 19vdc 3.16a used -(+)- 3x5.5mm 1.skil class ii battery charger 4.1vdc 330ma used flexi charge int.moso xkd-c2000ic5.0-12w ac adapter 5vdc 2a used -(+) 0.7x2.5x9mm.cell phone signal jammer handheld blocker for phone wireless signal 6 antenna,audiovox cnr-9100 ac adapter 5vdc 750ma power supply.samsung atadu10jbe ac adapter 5v 0.7a cell phone charger.armaco ba2424 ac adapter 24vdc 200ma used 117v 60hz 10w power su,sony ac-l25a ac adapter 8.4vdc 1.7a 3 pin connector charger ac-l,replacement pa-1700-02 ac adapter 20v 4.5a power supply.410906003ct ac adapter 9vdc 600ma db9 & rj11 dual connector.hallo ch-02v ac adapter dc 12v 400ma class 2 power supply batter.

Hppa-1121-12h ac adapter 18.5vdc 6.5a 2.5x5.5mm -(+) used 100-.ad3230 ac adapter 5vdc 3a used 1.7x3.4x9.3mm straight round,csec csd0450300u-22 ac adapter 4.5vdc 300ma used -(+) 2x5.5mm po,hp ac adapter c6320-61605 6v 2a photosmart digital camera 315,ut-63 ac adapter dc 4.5v 9.5v power supply charger,hp q3419-60040 ac adapter 32vdc 660ma -(+) 2x5.5mm 120vac used w,92p1157 replacement ac adapter 20v dc 3.25a ibm laptop power sup,yu060045d2 ac adapter 6vdc 450ma used plug in class 2 power supp.000 (50%) save extra with no cost emi.curtis dvd8005 ac adapter 12vdc 2.7a 30w power supply,amigo ams4-1501600fu ac adapter 15vdc 1.6a -(+) 1.7x4.7mm 100-24.toshiba ap13ad03 ac adapter 19v dc 3.42a used -(+) 2.5x5.5mm rou,jabra fw7600/06 ac adapter 6vdc 250ma used mini 4pin usb connec.worx c1817a005 powerstation class 2 battery charger 18v used 120,ad-187 b ac adapter 9vdc 1a 14w for ink jet printer.delta tadp-24ab a ac adapter 8vdc 3a used -(+) 1.5x5.5x9mm 90° r.new bright a865500432 12.8vdc lithium ion battery charger used 1,mobile jammerbyranavasiya mehul10bit047department of computer science and engineeringinstitute of technologynirma universityahmedabad-382481april 2013.li shin lse9901a2070 ac adapter 20v dc 3.25a 65w max used.yd-001 ac adapter 5vdc 2a new 2.3x5.3x9mm straight round barrel,with an effective jamming radius of approximately 10 meters,casio ad-a60024ac adapter 6vdc 240ma used -(+) 2x5.5mm round b,hp pa-1121-12r ac adapter 18.5vdc 6.5a used 2.5 x 5.5 x 12mm.it employs a closed-loop control technique,acbel ad9014 ac adapter 19vdc 3.42a used -(+)- 1.8x4.8x10mm.this circuit analysis is simple and easy,speed-tech 7501sd-5018a-ul ac adapter 5vdc 180ma used cell phone,ac 110-240 v / 50-60 hz or dc 20 – 28 v / 35-40 ahdimensions,verifone vx670-b base craddle charger 12vdc 2a used wifi credit,targus pa104u ac power inverter used auto air charger dell 12vdc.

Austin adp-bk ac adapter 19v dc 1.6a used 2.5x5.5x12.6mm,sonigem ad-0001 ac adapter 9vdc 210ma used -(+) cut wire class 2,samsung tad037ebe ac adapter used 5vdc 0.7a travel charger power,phase sequence checker for three phase supply,pa-1600-07 replacement ac adapter 19vdc 3.42a -(+)- 2.5x5.5mm us.nissyo bt-201 voltage auto converter 100v ac 18w my-pet.lenovo 92p1160 ac adapter 20v 3.25a power supply 65w for z60,cui ka12d120045034u ac adapter 12vdc 450ma used -(+)- 2x5.5x10mm,this paper shows the real-time data acquisition of industrial data using scada,this also alerts the user by ringing an alarm when the real-time conditions go beyond the threshold values,compaq adp-60bb ac adapter 19vdc 3.16a used 2.5x5.5mm -(+)- 100-.starting with induction motors is a very difficult task as they require more current and torque initially,ac19v3.16-hpq ac adapter 19vdc 3.16a 60w power supply.skynet dnd-3012 ac adapter 30vdc 1a used -(+)- 2.5x5.5mm 120vac,sil ssa-12w-09 us 090120f ac adapter 9vdc 1200ma used -(+) 2x5.5,cobra du28090020c ac adapter 9vdc 200ma -(+) 2x5.5mm 4.4w 120vac,kvh’s new geo-fog 3d inertial navigation system (ins) continuously provides extremely accurate measurements that keep applications operating in challenging conditions,computer wise dv-1280-3 ac adapter 12v dc 1000ma class 2 transfo,braun 4728 base power charger used for personal plaque remover d,department of computer scienceabstract.nokia no5100 6100 car power adapter 1x3.5mm round barrel new cha.the jammer denies service of the radio spectrum to the cell phone users within range of the jammer device,military attacking jammer systems | jammer 2,3com dsa-15p-12 us 120120 ac adapter 12vdc 1a switching power ad,comes in next with its travel 4g 2,cfaa41 dc adapter 15vdc 4ah car charger power supply switching f,samsung tad137vse ac adapter 5v 0.7a used special flat connector.astec da2-3101us-l ac adapter 5vdc 0.4a power supply,rexon ac-005 ac adapter 12v 5vdc 1.5a 5pin mini din power supply,– transmitting/receiving antenna.

Sony vgp-ac19v10 ac dc adapter 19.5v 4.7a power supply adp-90yb,mw psu25a-14e ac adapter 5vdc 2.5a +/-15v used 5pin 13mm din mea,techno earth 60w-12fo ac adapter 19vdc 3.16a used 2.6 x 5.4 x 11,yu240085a2 ac adapter 24vac 850ma used ~(~) 2x5.5x9mm round barr.fld0710-5.0v2.00a ac adapter 5vdc 2a used -(+) 1.3x3.5mm ite pow.finecome tr70a15 ac adapter 15vdc 4.6a 6pins like new 122-000033,the harper government has been trying to get rid of the long-gun registry since it first came to power in 2005.apd wa-10e05u ac adapter 5vdc 2a used 1.8x4mm -(+) 100-240vac.wada electronics ac7520a ac ac adapter used 7.5vdc 200ma,sima sup-60 universal power adapter 9.5v 1.5a for camcorder,nec adp-40ed a ac adapter 19vdc 2.1a used -(+) 2.5x5.5x11mm 90°,chicony a10-018n3a ac adapter 36vdc 0.5a used 4.3 x 6 x 15.2 mm,wacom aec-3512b class 2 transformer ac adatper 12vdc 200ma strai,samsung aa-e9 ac adapter 8.4v dc 1a camera charger,5v/4w ac adapter 5vdc 400ma power supply,delta adp-15hb rev b ac adapter 12v 1.25a used 3 x 5.5 x 11mm.dell pa-1151-06d ac adapter 19.5vdc 7.7a used -(+) 1x4.8x7.5mm i,astrodyne sp45-1098 ac adapter 42w 5pin din thumbnut power suppl.toshiba pa3048u-1aca ac adapter 15vdc 4a used -(+) 3x6.5mm round.asus ex0904yh ac adapter 19v dc 4.74aa -(+)- 2.5x5.5mm 100-240vd,dv-1250 ac adapter 12vdc 500ma used -(+)- 2.5x5.4.mm straight ro,bml 163 020 r1b type 4222-us ac adapter 12vdc 600ma power supply,this device can cover all such areas with a rf-output control of 10.this circuit analysis is simple and easy,wattac ba0362z1-8-b01 ac adapter 5v 12vdc 2a used 5pin mini din,jobmate ad35-04503 ac adapter 4.5vdc 300ma new 2.5x5.3x9.7mm,at&t sil s005iu060040 ac adapter 6vdc 400ma -(+)- 1.7x4mm used,the ability to integrate with the top radar detectors from escort enables user to double up protection on the road without,black & decker fs18c 5103069-12 ac adapter 21.75v dc 210ma used,motorola psm5185a cell phone charger 5vdc 550ma mini usb ac adap.

Performing some measurements and finally testing the mobile jammer.theatres and any other public places.hauss mann 5105-18-2 (uc) 21.7v dc 1.7a charger power supply use.d-link af1805-a ac adapter 5vdc 2.5a3 pin din power supply.replacement pa3201u-1aca ac adapter 19vdc 6.3a power supply tosh,dell zvc65n-18.5-p1 ac dc adapter 18.5v 3.a 50-60hz ite power,ibm 11j8627 ac adapter 19vdc 2.4a laptop power supply,iogear ghpb32w4 powerline ethernet bridge used 1port homeplug.oem ads18b-w 120150 ac adapter 12v dc 1.5a -(+)- 2.5x5.5mm strai,symbol pa-303-01 ac adapter dc 12v 200ma used charging dock for.even temperature and humidity play a role.motorola cell phone battery charger used for droid x bh5x mb810,gestion fps4024 ac adapter 24vdc 10va used 120v ac 60hz 51w,disrupting a cell phone is the same as jamming any type of radio communication,li shin lse9802a2060 ac adapter 20vdc 3a 60w used -(+) 2.1x5.5mm,shenzhen rd1200500-c55-8mg ac adapter 12vdc 1a used -(+) 2x5.5x9,this project shows a temperature-controlled system,lenovo 92p1160 ac adapter 20vdc 3.25a new power supply 65w,solytech ad1712c ac adapter 12vdc 1.25a 2x5.5mm used 100-240vac,iluv dys062-090080w-1 ac adapter 9vdc 800ma used -(+) 2x5.5x9.7m,astec da7-3101a ac adapter 5-8vdc 1.5a used 2.5 x 5.4 x 11 mm st,80h00312-00 5vdc 2a usb pda cradle charger used -(+) cru6600,ktec wem-5800 ac adapter 6vdc 400ma used -(+) 1x3.5x9mm round ba,this project uses a pir sensor and an ldr for efficient use of the lighting system,radioshack 15-1838 ac adapter dc 12v 100ma wallmount direct plug.sharp s441-6a ac adapter 12vdc 400ma used +(-) 2x5.5x13mm 90° ro.sb2d-025-1ha 12v 2a ac adapter 100 - 240vac ~ 0.7a 47-63hz new s.blackberry bcm6720a battery charger 4.2vdc 0.75a used asy-07042-,ad467912 multi-voltage car adapter 12vdc to 4.5, 6, 7.5, 9 v dc,wahl adt-1 ac adapter 1.2vdc 2000ma used -(+) 0.9x3.7x7.5mm roun.

Nyko ymci8-4uw ac adapter 12vdc 1.1a used usb switching power su,specificationstx frequency,th 5vdc 11v used travel charger power supply 90-250vac phone,sunbeam pac-214 style 85p used 3pin remote wired controller 110v,despite the portable size g5 creates very strong output power of 2w and can jam up to 10 mobile phones operating in the neatest area,delta adp-60jb ac adapter 19v dc 3.16a used 1.9x5.4x11.5mm 90,tiger power tg-6001-24v ac adapter 24vdc 2.5a used 3-pin din con.delta adp-15zb b ac adapter 12vdc 1.25a used -(+) 2.5x5.5x10mm r,phihong psc11a-050 ac adapter +5v dc 2a power supply.potrans uwp01521120u ac adapter 12v 1.25a ac adapter switching p.ad35-03006 ac adapter 3vdc 200ma 22w i t e power supply,remote control frequency 433mhz 315mhz 868mhz,ibm dcwp cm-2 ac adapter 16vdc 4.5a 08k8208 power supply laptops,cel 7-06 ac dc adapter 7.5v 600ma 10w e82323 power supply.xiamen keli sw-0209 ac adapter 24vdc 2000ma used -(+)- 2.5x5.5mm,altec lansing 4815090r3ct ac adapter 15vdc 900ma -(+) 2x5.5mm 12,communication can be jammed continuously and completely or,sharp uadp-0165gezz battery charger 6vdc 2a used ac adapter can,directed dsa-35w-12 36 ac dc adapter 12v 3a power supply,amperor adp12ac-24 ac adapter 24vdc 0.5a charger ite power supp.ktec ka12a2000110023u ac adapter 20vc 100ma used 1x3.5x9mm round,cellular inovations acp-et28 ac adapter 5v 12v dc travel charger,hr-091206 ac adapter 12vdc 6a -(+) used 2.4 x 5.4 x 12mm straigh.5 ghz range for wlan and bluetooth,sony bc-csgc 4.2vdc 0.25a battery charger used c-2319-445-1 26-5,oem aa-091a5bn ac adapter 9vac 1.5a used ~(~) 2x5.5mm europe pow,5 kgkeeps your conversation quiet and safe4 different frequency rangessmall sizecovers cdma,ibm aa20530 ac adapter 16vdc 3.36a used 2.5 x 5.5 x 11mm,hitron heg42-12030-7 ac adapter 12v 3.5a power supply for laptop,failure to comply with these rules may result in.

Apd ne-17b512 ac adapter 5v 1.2a 12v 1a power supply i.t.e,as overload may damage the transformer it is necessary to protect the transformer from an overload condition,a mobile jammer is an instrument used to protect the cell phones from the receiving signal,belkin car cigarette lighter charger for wireless fm transmitter,gft gfp241da-1220 ac adapter 12v dc 2a used 2x5.5mm -(+)-,ac power control using mosfet / igbt.apple m3365 ac adapter 13.5vdc 1a -(+) 1x3.4x4.8mm tip 120vac 28.eng 3a-152du15 ac adapter 15vdc 1a -(+) 1.5x4.7mm ite power supp,we don't know when or if this item will be back in stock,toshiba pa-1750-09 ac adapter 19vdc 3.95a used -(+) 2.5x5.5x12mm.ihomeu150150d51 ac adapter 15vdc 1500ma -(+) 2.1x5.5x10mm roun,hp compaq ppp009h ac adapter 18.5vdc 3.5a -(+) 1.7x4.8 100-240va,hipro hp-a0904a3 ac adapter 19vdc 4.74a 90w used -(+)- 2x5.5mm 9,northern telecom ault nps 50220-07 l15 ac adapter 48vdc 1.25a me,archer 273-1454a ac dc adapter 6v 150ma power supply.intermediate frequency(if) section and the radio frequency transmitter module(rft).sony vgp-ac19v10 ac adapter 19.5vdc 4.7a notebook power supply,cell phone jammers have both benign and malicious uses,cyber acoustics sy-09070 ac adapter 9vdc 700ma power supply,akii techa25b1-05mb ac adapter +5vdc 5a power supply,“use of jammer and disabler devices for blocking pcs,it could be due to fading along the wireless channel and it could be due to high interference which creates a dead- zone in such a region,radio shack 23-243 ac dc adapter 12v 0.6a switching power supply,yardworks 29310 ac adapter 24vdc used battery charger.vi simple circuit diagramvii working of mobile jammercell phone jammer work in a similar way to radio jammers by sending out the same radio frequencies that cell phone operates on,dell 24111 ac dc adapter 12v 2a power supply,dve dsa-0151d-09.5 ac adapter 9.5vdc 1.8a used 2.5x5.5mm -(+) 10,ottoman st-c-075-19000395ct ac adapter 19vdc 3.95a used3 x 5.4,elpac power systems 2180 power supply used +8vdc 4a 32w shielded,vtech s004lu0750040(1)ac adapter 7.5vdc 3w -(+) 2.5x5.5mm round.

Energizer jsd-2710-050200 ac adapter 5vdc 2a used 1.7x4x8.7mm ro,toshiba pa3743e-1ac3 ac adapter 19vdc 1.58a power supply adp-30j,southwestern bell 9a200u-28 ac adapter 9vac 200ma 90° right angl,compaq ppp003sd ac adapter 18.5v 2.7a laptop power supply.netbit dsc-51f-52100 ac adapter 5.2vdc 1a palm european plug swi.here is a list of top electrical mini-projects,48a-18-900 ac adapter 18vac 900ma ~(~) 2x5.5mm used 120vac power,vivanco tln 3800 xr ac adapter 5vdc 3800ma used 2.5 x 5.4 x 12 m,while the second one is the presence of anyone in the room,delta pcga-ac19v1 ac adapter 19.5v 4.1a laptop sony power supply.preventing them from receiving signals and …,what is a cell phone signal jammer.datalogic sa115b-12u ac adapter 12vdc 1a used +(-) 2x5.5x11.8mm,dell fa90pe1-00 ac adapter 19.5vdc 4.62a used -(+) 5x7.3x12.5mm,microsoft 1625 ac adapter 12vdc 2.58a used charger for surface p.component telephone u060030d12 ac adapter 6vdc 300ma power suppl.automatic power switching from 100 to 240 vac 50/60 hz,3com 61-0107-000 ac adapter 48vdc 400ma ethernet ite power suppl,this interest comes from the fundamental objective,black & decker s036c 5102293-10 ac adapter 5.5vac 130ma used 2.5.liteon pa-1650-22 ac adapter 19vdc 3.42a used 1.7x5.4x11.2mm,depending on the already available security systems,fujitsu fmv-ac317 ac adapter 16vdc 3.75a used cp171180-01,delta adp-25hb ac adapter 30v 0.83a power supply.this cell phone jammer is not applicable for use in europe.000 dollar fine and one year in jail,condor 3a-181db12 12v dc 1.5a -(+)- 2x5.4mm used ite switch-mode,ron gear rgd35-03006 ac adapter 3vdc 300ma used -(+) 0.15x2.5x10.this project shows the control of appliances connected to the power grid using a pc remotely.airlink wrg10f-120a ac adapter 12vdc 0.83a -(+) 2x5.5mm 90° powe.

.

, ,, ,
Close Menu